>High Bay Manual
Please read the instructions carefully before installing the product and save it for future reference. Note Sulfide and corrosive and soluble chemicals can damage the lamp housing and even cause the lamp to die. The normal use ambient temperature is -30°C~65°C. If it exceeds this range, it will have an adverse effect on product life. The company will not be responsible for the consequences of using transformers other than those provided by the company.
1. Please cut off the power before installation;
2. Please do not connect the high voltage power supply before installing the product, and strictly use the product’s nominal working electrical parameters to connect;
3. If the external power lines and signal lines of the lamps are damaged, the power must be cut off first and repaired or replaced by engineering and technical personnel holding qualification certificates;
4, power, lamp beads must be replaced by professionals;
5. It is forbidden to use violence to install and construct during construction and installation;
6, pay attention to fire, electricity, shock.
Copyright © 江苏梁丰照明有限公司 All Rights Reserved 备案号：苏ICP备11071871号-1